* Important: if a remote control button does not work when pressed,
Setting the VOLUME ADJUST (DVD only)
Some DVDs are recorded in lower than average volume levels.
For these DVDs, this DECK can be set so that the average volume is increased automatically.
Press VOL.ADJ repeatedly to change "OFF" ↔ ↔ ↔ ↔ ↔ "ON."
• "OFF" or "ON" lights up on Multi Function Display (about 3 seconds) when
VOL.ADJ is pressed.
Some DVD
[Low volume level]
• "ON" is set ..... When a DVD is played back, the average volume is increased.
• "OFF" is set .... The volume level recorded on the disc is played back just as it is.
Notes
• While settings can be made with all discs, they may have no effect with some discs.
Please set as you prefer.
• When audio equipment is connected, setting the Sound Output level to "OFF" is recommended.
• If the sound becomes abnormal while playing a disc, set the Sound Output level to "OFF."
D4744S-K P36-64 (040202).p65
press the DVD button on the remote and try the button again.
VOLUME ADJUST "OFF"
Volume is at the original level.
41
VOLUME ADJUST "ON"
Volume level is increased
when played back.
VOLUME
ADJUST
2004/02/02, 15:10
41