Panasonic DOUBLE FEATURE PV-D4744S-K Manuel D'utilisation page 15

I Connecting Amplifier (5.1 ch Surround system) [Digital connection]
DECK Dolby Digital Receiver Amplifier Speaker
DECK DTS (Digital Theater Systems) Receiver Amplifier Speaker
When DVDs recorded in Dolby Digital or DTS are played, Dolby Digital bitstream
or DTS bitstream is output from the DECK OPTICAL digital audio output connector.
When DECK is connected to a Dolby Digital or DTS receiver, you can enjoy
theater-quality audio in your home. [An optical digital audio cable (optional) is
required when an optional Dolby Digital or DTS receiver is used.]
Notes on connecting an optical
digital audio cable (optional)
• Firmly connect the cable to the
connector.
DVD/VCR DECK
(Rear)
Optical Digital
Audio Cable
(optional)
Caution for optical digital audio output connector:
• When connecting an amplifier (with an Optical Digital Input Connector) which does
not contain the Dolby Digital or DTS receiver, be sure to select "PCM" at "Dolby
Digital" and "PCM" at "dts" of the Settings for DVD Operation "Audio Output"
(see p. 53).
Otherwise, any attempt to play DVDs may cause such a high level of noise that it
may be harmful to your ears and damage your speakers.
• When a Dolby Digital/DTS receiver is connected, please select "Bitstream" at "dts" or
"Dolby Digital" of the Settings for DVD Operation "Audio Output".
If "PCM" is selected, there will be stereo sound. (See p. 53.)
• CDs can be played as usual.
Note:
• Some DTS receivers which do not support DVD-DTS interface may not work properly with
DECK.
D4744S-K P1-25 (040202).p65
or
Surround
Speaker
[5.1 ch Surround system]
Front
Speaker
Decoder with
Dolby Digital /
DTS processing
To Optical Digital
Audio Input Connector
15
Surround
Speaker
Center
Speaker
Front
Speaker
Amplifier
Receiver
Subwoofer
2004/02/02, 15:10
15