Repeat Play - Panasonic DOUBLE FEATURE PV-D4744S-K Manuel D'utilisation

*Important: If a remote control button does not work when pressed,
Tape Select
Select your tape length so the tape position
and amount of tape remaining are properly
displayed. (See "Tape Position and tape
status Display" section right.)
1
Press ACTION
to display MENU.
2 Press
MENU
SET UP VCR
"SET UP VCR," and
SET UP CLOCK
SET UP CHANNEL
IDIOMA/LANGUE : ENGLISH press SET.
VCR'S OUTPUT CH:3
SELECT :
SET : SET
EXIT : ACTION
3 Press
SET UP VCR

REPEAT PLAY

: OFF
"TAPE SELECT,"
REMOTE WARN I NG : ON
AUTO SHUT - OFF
: OFF
and press SET to
FRONT DISPLAY : ON
AUTO VCR/TV : ON
TAPE SELECT : T-120 set "T-120," "T-160"
SELECT : SET : SET
or "T-180."
END : ACT I ON
T-120
• Select "T-120" for tapes 120 minutes or
less, "T-160" if 140 or 160 minutes, and
"T-180" if 180 minutes.
4
Press ACTION
to return to normal screen.
Repeat Play
Set to playback a recording over and over.
1
Press ACTION
to display MENU.
2
Press
MENU
SET UP VCR
SET UP CLOCK to select "SET UP
SET UP CHANNEL
IDIOMA/LANGUE : ENGLISH
VCR," and press
VCR'S OUTPUT CH:3
SET.
SELECT : SET : SET
EXIT : ACTION
3 Press
SET UP VCR
REPEAT REPEAT PLAY : OFF
to select "REPEAT
REMOTE WARN I NG : ON
AUTO SHUT - OFF
: OFF
PLAY," and press
FRONT DISPLAY : ON
AUTO VCR/TV : ON
TAPE SELECT : T-120 SET to set "ON" or
SELECT : SET : SET
"OFF."
END : ACT I ON
• Play repeats at tape end or if unrecorded
portion over 30 sec. is detected.
4
Press ACTION
to return to normal screen.
Note
• For repeat play in DVD mode, see page 47.
D4744S-K P26-35 (040202).p65
press the VCR button on the remote and try the button again.
Tape Position and Tape Status Display
To find out the present tape position and
amount of tape remaining.
Tape position is displayed incorrectly
in the following cases:
• If VHS-C type cassettes, tapes under 30
minutes, tapes over 180 minutes, or
incompatible tapes are used.
to select
• If the correct tape length is not selected.
(See "Tape Select" section left.)
1 Press TAPE POSITION
to detect current tape position.
to select
DETECTING TAPE POSITION
T-160 T-180
BEG I N
2 Press TAPE POSITION
(or wait 5 seconds) to return to
normal screen.
Auto Operation Functions
Auto Play
Insert a tape ➛ Power comes on,
➛ Play starts if there is no record tab
(see p. 6).
Auto Rewind
Play
Fast Forward
Play Auto Eject
(Repeat Play must be off)
➛ ➛ ➛ ➛ ➛
Play Tape end
➛ ➛ ➛ ➛ ➛
Tape ejects if some programs are set.
31
• "DETECTING TAPE
POSITION" only
appears the first time a
cassette is inserted
and it takes several
seconds for correct
SP
indication to appear.
• The present tape
R 120 M I N.
position indication and
amount of tape
END
remaining (according to
tape speed) are
displayed.
Tape remaining time
display may not be
precise.
➛ ➛ ➛ ➛ ➛
➛ Tape end ➛ Rewind
➛ ➛ ➛ ➛ ➛ ➛ ➛ ➛ ➛ ➛
Rewind Stop
2004/02/02, 15:10
Stop
31