Indicator Light And Alarm Sounds - ECOVACS ROBOTICS DEEBOT 605 Manuel D'instructions

5. Indicator Light and Alarm Sounds

DEEBOT will tell you something is wrong with an alarm indicator light and sounds. More detailed support is available through the ECOVACS App and
online website.
Indicator Light
The robot has low battery
The robot has a problem
Programmed Cleaning Pattern is enabled
Alarm Sounds
Alarm Sound
One Beep
Two Beeps
Three Beeps
Continuous Beeps
22
EN
Scenario
The robot is cleaning
The robot is charging
Main Brush or Side Brush is tangled.
Anti-Drop Sensor Malfunction
Dust Bin is not properly installed.
The Robot is suspended or the Driving Wheels are
tangled.
Problems
Indicator Light
AUTO Mode Button glows a solid WHITE
AUTO Mode Button flashes WHITE
AUTO Mode Button glows a solid RED
AUTO Mode Button flashes RED
Cleaning Mode Switch Indicator lights up
Solution
Clean Main Brush or Side Brush as mentioned in
Section 4 Maintenance.
Use a cleaning cloth to wipe the Anti-Drop Sensor
clean.
Make sure the Dust Bin has been installed; if it has,
take it out and put it back in properly.
Put the Robot back on the ground or gently pat the
bumper and clean the Driving Wheel as mentioned in
Section 4 Maintenance.