Unfold The Lower Handle; Install The Upper Handle; Install The Grass Catcher; Install The Mulch Plug - GreenWorks LMB401 Manuel De L'opérateur

Tondeuse à gazon
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

7.2

UNFOLD THE LOWER HANDLE

1. Pull and turn the handle knobs (12) 90°.
2. Unfold the lower handle (3).
3. Line up the handle knobs in one of the three
positions on the brackets.
4. Turn the handle knobs 90° until they engage the
holes in the brackets.
NOTE
Make sure that the two handle knobs are in the same
position.
WARNING
Do not damage or pinch the cables when you fold or
unfold the handle.
7.3

INSTALL THE UPPER HANDLE

14
1. Align the holes in the upper handle (2) and the lower
handle (3).
2. Put the bolts (14) through the holes.
3. Tighten the knobs (13) onto the bolts.
4. Do the same operation on the other side.
English
3
12
2
13
3
9
7.4

INSTALL THE GRASS CATCHER

9
1. Remove the mulch plug.
2. Remove the side discharge chute.
3. Open the rear discharge door (4) and hold it.
4. Hold the the grass catcher (9) by its handle and
engage the hooks (15) on the door rod (16).
5. Close the rear discharge door.
7.5

INSTALL THE MULCH PLUG

4
11
1. Remove the grass catcher.
2. Open the rear discharge door (4) and hold it.
3. Hold the mulch plug (11) by its handle and fit it in
the discharge chute.
4. Close the rear discharge door.
4
16
15
EN

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

2506902

Table des Matières