Bosch NGM54 55UC Mode D'emploi page 12

• Burner flames are too high.
• Flames shoot out of burners.
• Burners do not ignite.
• Burner flames light unevenly.
• Burner emits gas odor.
Placing Burner Caps
Each cap has a letter (A, C, D, or F) cast in the underside
of the cap that corresponds to a letter (A, C, D, or F) cast in
the burner base that is attached to the appliance.
Burner Base
9001172130 Rev A
• After electrical connection is complete, place each
burner cap on its correct burner base per its
corresponding letter designation. See Figure 9
"Burners Caps" on page 12.
• Place burner cap gently on top of base so that the
prongs of the burner base fit snugly into the groove of
the burner cap.
Burner Cap
Matching letter
designation.
Figure 9: Burners Caps
English 12