Resonance R25C Manuel D'utilisation page 57

AUTORUN It appears when middle ear
CHECK analyzer tests are performed
when the Autorun function has
been activated
DO YOU This query appears after entry of
CONFIRM ? plot cancellation or parameter
change requests
CHANGE This message appears at the end
CALIBRATION of the device calibration proce-
DATE ? dure, once the "SAVE" softkey has
been pressed and values have
been changed.
INSERT PROBE This message appears when
INTO THE on the Compliance Calibration
SPECIFIED CAVITY page
PRESS This message comes up on the
CONFIRM/AUTO- Compliance Calibration page
MATIC the instant in which the probe is
KEY inserted into the specified cavity
CHECK CAVITY This message is given on the
Compliance Calibration page if
the probe is not inserted into the
displayed cavity
READ This message is given on the
VALUE (ml) Compliance Calibration page, at
the end of the calibration process
INSERT PROBE This message appears on the
INTO THE 2cc ARLT Calibration page, if the
CAVITY probe is not inserted into the
2cc cavity.
PRESS RUN TO This message appears on the
PERFORM ARLT Calibration page, when
CALIBRATION the probe is inserted into the
2cc cavity
ENTER This message appears when
PASSWORD attempting first-time access to
the device calibration procedure,
once the unit has been switched
on
WRONG This message appears when
PASSWORD attempting to access the device
calibration procedure using a
wrong password
System It means that the test is
message being performed with
the Autorun function
activated
System It means that a plot
message cancellation or a
parameter change
request has been
entered
System It provides the option
message of updating periodic
calibration dates
System This message refers
message to the cavity value
displayed on the Cali-
bration page, that it is
necessary to insert the
probe into for calibra-
tion performance
System It provides instruc-
message tions that need to be
followed in order to
proceed with compli-
ance calibration
System It means that the probe
message has been inserted into
the wrong cavity
System It means that the value
message that is displayed is the
real-time value reading
by the device
System You are instructed to
message insert the probe into
the 2cc cavity in order
to perform calibration
System It provides instructions
message on proceeding with
calibration
System It instructs you to enter
message your access password
to unlock the device
calibration procedure
System It means that you have
message entered the wrong
password for access to
the Calibration menus
No action is required–if
the Autorun function
is not wanted, it can be
deactivated via the Setup
menu
Press either the YES or
the NO when the query
appears
Press either the YES or
the NO when the query
appears
Insert the probe into the
test cavity as displayed
Press the confirmation
key to calibrate selected
probe tone frequency
or automatic key to
calibrate all probe tone
frequencies (PT models)
Proceed with inserting
the probe into the
correct test cavity, as
displayed
No action is required
Proceed with inserting
the probe into the 2cc
cavity
Press the Start key as
instructed
Enter your password via
the softkeys
Press the Enter key, then
re-enter the password
correctly
57