TaoTronics TT-BA07 Mode D'emploi page 6

2. Find "TaoTronics TT-BA07" in the search results and
tap on it to connect. Once connected, the LED
indicator will turn solid blue.
Note:
• The adapter enters pairing mode automatically
when powered on for the rst time.
• The original pairing memory will be cleared after
a mode switch. It will automatically start pairing
each time it's powered on.
• If a PIN code is required for pairing, try 0000 (four
zeroes), 8888 (four eights), 1111 (four ones), or
1234.
• The adapter can remember previously paired
devices and will attempt to pair with devices
automatically, without going into pairing mode.
Pair with two devices at the same time
In TX mode:
In TX mode, the adapter is able to pair with two
Bluetooth
® stereo earphones/speakers at the same
time.
1. Follow the previous instructions in the "Pairing"
section to pair the TT-BA07 with your rst device.
2. Turn off the Bluetooth function on your rst device,
®
tap the Power Button twice to pair and connect
to your second device.
3. Turn on the Bluetooth
®
In approximately 30 seconds, the rst device will
automatically connect in.
Note:
• When you pair with two devices, both can play
music at the same time.
function on your rst device.
• The adapter will automatically re-pair when
powered on.
In RX mode:
In RX mode, the adapter is able to pair with two
Bluetooth
devices at the same time.
®
1. Follow previous instructions in the "Pairing"
section to pair the TT-BA07 with your rst device.
Disable the Bluetooth
®
device. Tap the Power Button twice to pair with
the second device.
2. Turn on the Bluetooth
®
TT-BA07 adapter is successfully paired with both
devices.
Note:
• Only one device can play music at any time. You
have to stop the music on one device to play on
the other.
• The adapter will automatically re-pair when
powered on.
Care and Maintenance
• Keep the adapter away from heat and humidity.
• Do not expose the adapter to direct sunlight or
extreme heat.
• Do not try to take the adapter apart. It may cause
serious damage.
• Do not drop or knock the adapter on hard
surfaces as it damages the interior circuit.
• Do not use chemicals or detergents to clean the
product.
• Do not scrape the surface with sharp objects.
function on your rst
of the rst device, now
07/08