Taurus Alpatec TORONTO P Mode D'emploi page 12

- Do not use the appliance to dry textiles of any
kind.
- CAUTION: User can't sleep when appliance is
under use; there is a risk of injuries.
SERVICE:
- Make sure that the appliance is serviced only
by specialist personnel, and that only original
spare parts or accessories are used to replace
existing parts/accessories.
- CAUTION: There is a risk of fire if the appli-
ance's cleaning is not done according to these
instructions.
- Any misuse or failure to follow the instructions
for use renders the guarantee and the manufac-
turer's liability null and void.
DESCRIPTION
A Air outlet
B On/Of switch
C Control panel
D Top wall bracket
E L-shape
F Plastic expansion screw
G Wall screws
H L-shape fixing screws
CONTROL PANEL
a On/off button
b + button
c - button
d Low/high heating power button
e Clock button
f Intensity of flame button
REMOTE CONTROL
I On/off button
II Low/high heating power button
III + button
IV Intensity of flame button
V Days button
VI - button
VII Hours button
VIII Weekly program button
IX Set up button
X Minutes button
If the model of your appliance does not have the
accessories described above, they can also be
bought separately from the Technical Assistance
Service.
INSTALLATION:
- Install the appliance away from flammable ma-
terial such as textiles, cardboard or paper, etc.
- Install the appliance a minimum distance of
50cm away from combustible materials, such as
curtains, furniture ...
- Ensure that neither the air access nor exit
become either totally or partially covered by
drapery, clothing, etc., as this increases the risk
of fire.
- The appliance requires suitable ventilation in
order to work properly. Leave a space of 30 cm
between walls or other obstacles and 60 cm
from the floor.
- Do not cover or obstruct any of the openings of
the appliance.
- The plug must be easily accessible so it can be
disconnected in an emergency.
- To achieve the highest efficiency from the
appliance it should be situated in a place where
the atmospheric temperature is between 12 and
32ºC.
- To achieve the highest efficiency from the ap-
pliance and so as to be able to install the appli-
ance on a cold wall (an exterior wall) and below
a window. But never obstructing or covering a
ventilation area.
- The appliance should work well with its wall
support attached or with its base/feet attached.
- The appliance has a wall bracket (D) which
must be fixed to the wall.
- Ensure that the appliance is properly and safely
fixed in his working position with screws. To
avoid damaging the appliance, on recommend
to use only the holes specifically made by the
manufacturer.
ASSEMBLING THE WALL BRACKET:
- The appliance has a wall bracket (D) on which it
can be supported.
- Taking into account the separation distances
mentioned above, place the wall support in the
required position and mark the drilling points on
the wall. (Fig.1).
- Drill into the wall where marked and insert the
rawlplugs. (Fig.1).
- Place the wall support (D) by matching the
holes with the rawlplugs and screw in firmly.
(Fig.1).
- Make sure that the bracket is firmly fixed; it
should be able to support twice the weight of the
appliance.
- Screw the L-shape (E) onto the appliance using
the screws (H).
- Fit the appliance into the wall bracket (D) and
screw L-shape to the wall.