Important Safety Instructions; Grounding Instructions; Operating Safety Rules And Practices - Windsor Saber Blade 16 Mode D'emploi

IMPORTANT SAFETY IN-
STRUCTIONS
READ ALL INSTRUCTIONS
BEFORE USING.
WARNING
To reduce the risk of fire, electric
shock, or injury:
Do not leave appliance when
–
plugged in. Unplug from outlet when
not in use and before servicing.
WARNING
TO REDUCE THE RISK OF ELEC-
–
TRIC SHOCK-USE INDOORS
ONLY
Do not allow to be used as a toy.
–
Close attention is necessary when
used by or near children.
Use only as discribed in this manu-
–
al. Use only manufacturer`s recom-
mended attachments.
Do not use with damaged cord or
–
plug. If appliance is not working as it
should, has been dropped, dam-
aged, left outdoors, or dropprd into
water, return it to a service center.
Do not pull or carry by cord, use
–
cord as a handle, close a door on
cord, or pull cord around sharp edg-
es or corners. Do not run appliance
over cord. Keep cord away from
heated surfaces.
Do not unplug by pulling on cord. To
–
unplug, grasp the plug, not the cord.
Do not handle plug or appliance
–
with wet hands.
Do not put any object into openings.
–
Do not use with any opening
blocked; keep free of dust, lint, hair,
and anything that may reduce air
flow.
Keep hair, loose clothing, fingers,
–
and all parts of body away from
openings and moving parts.
Turn off all controls before unplug-
–
ging.
Use extra care when cleaning on
–
stairs.
Do not use to pick up flammable or
–
combustible liquids, such as gaso-
line, or use in areas where they may
be present.
Connect to a properly grounded
–
outlet only. See Grounding Instruc-
tion.
SAVE THESE INSTRUCTIONS

GROUNDING INSTRUCTIONS

This appliance must be grounded. If it
should malfunction or breakdown,
grounding provides a path of least re-
sistance for electric current to reduce
the risk of electric shock. This appli-
ance is equipped with a cord having an
equipment-grounding conductor and a
grounding plug. The plug must be in-
serted into an appropriate outlet that is
properly installed and grounded in ac-
cordance with all local codes and ordi-
nances.
WARNING
Improper connection of the equipment
grounding conductor can result in a risk
of electric shock. Check with a qualified
electrician or service person if you are
in doubt as to whether the outlet is
properly grounded. Do not modify the
plug provided with the appliance-if it
will not fit the outlet, have a proper out-
let installed by a qualified electrician.
This appliance is for use on a nominal
120-volt circuit and has a grounding at-
tachment plug that looks like the plug il-
lustrated in illustration A. Make sure
that the appliance is connected to an
outlet having the same configuration as
the plug. No adaptor should be used
with this appliance.
CONNECT TO A PROPERLY
GROUNDED OUTLET ONLY
1 Grounded outlet
2 Grounded outlet Box
3 Grounded Pin
OPERATING SAFETY RULES
AND PRACTICES
Operator Responsibility
Safe operation is in the responsibility of
the operator.
The operator shall be familiar with the
operation and function of all controls
and instruments before operating the
unit.
Before operating the unit, operators
shall have read and be familiar with the
operator's manual for the particular unit
being operated and they shall also
abide by the safety rules and practices
in the following paragraphs.
Before operating any unit, the operator
shall be familiar with unusual operating
conditions which may require addition-
al safety precautions or special operat-
ing instructions.
General
Before starting to operate the unit be in
operating position.
Do not start or operate the unit, any of
its functions or attachments, from any
place other than from the designated
operators position.
Before leaving the operator's position:
A bring the unit to a complete stop;
B if the unit must be on an incline,
block the wheels.
Maintain a safe distance from the edge
of ramps, platforms, and other similar
working surfaces.
Do not add to, or modify the unit.
Do not block access to fire aisles, stair-
ways or fire equipment.
3
English