Citizen CT-E651 Mode D'emploi page 67

 Black mark paper
A
B
C D
F
(a) Where printing is between BM gaps
Symbol
A
B
C
D
E
F
CAUTION
 Use a black mark PCS value of 0.90 or more.
 Take the basic printing position ±2 mm into account for print cue accuracy using black mark
detection. For printing length, take variations in the ambient temperature and platen diameter
machining accuracy in the initial state into account and allow for ±2% with regard to setting
values. Additionally, when considering the product life, allow for a maximum of -5% with regard
to setting values. When using preprinted paper, give due consideration to the print layout.
 If printing spans multiple black marks, the black marks are ignored, and printing continues.
Cut position
Printable
area
Black mark position on right edge
Black mark position on left edge
Black mark height
Black mark cut position
Above paper margin
Black mark pitch
—
E
Paper feeding
direction
(b) Where printing spans multiple BM gaps
Item
13.4 or more
0.4 or less
4 to 6
2 to 3
0 ±0.5
30 to 300
67
—
Cut position
Printable
area
(Unit: mm)
Dimensions