Samsung ME11A7510 Serie Manuel D'installation page 10

Step-by-step installation guide
C. Determining wall plate location under your cabinet
C L
At least 30˝
Plate position – beneath recessed bottom
cabinet with front overhang
Draw a horizontal
line to mark how
far the inside of
the front overhang
descends below
the cabinet.
` i
24 1 /
10 English
Install_ME11A7510DG_AC_DE68-04709B-00_EN+CFR.indb 10 Install_ME11A7510DG_AC_DE68-04709B-00_EN+CFR.indb 10
Plate position – beneath a flat bottom
cabinet.
Draw a vertical line on the wall at the
center of the 30˝ wide space. Tape the Rear
Wall Template onto the wall so that the top
of the template touches the bottom of the
cabinet and the centerline on the template
lines up with the line you drew on the wall.
Plate position – beneath a recessed bottom
cabinet with a front overhang.
Draw a vertical line on the wall at the
center of the 30˝ wide space. Draw a
second, horizontal line on the wall below
the cabinet to mark how far the inside of
the front overhang descends below the
cabinet. Tape the Rear Wall Template onto
the wall so that the top of the template
˝
5
touches the bottom of the horizontal line
and the centerline on the template lines up
with the vertical line.
C L
24 1 / ˝
5
Your cabinets may have decorative trim that interferes with the microwave
installation. Remove the decorative trim to install the microwave properly and to
make it level.
THE MICROWAVE MUST BE LEVEL.
Use a level to make sure the cabinet bottom is level.
Plate position – beneath a framed recessed
cabinet bottom.
Draw a vertical line on the wall at the
center of the 30˝ wide space. Tape the Rear
Wall Template onto the wall so that the top
of the template touches the bottom of the
cabinet frame and the centerline on the
template lines up with the line you drew
on the wall.
2021-06-16 2021-06-16 11:00:50 11:00:50