Assembly - first years Breastflow Memory Pump Manuel D'instructions

Memory Pump

Assembly

Clean all parts before use. See "Breast Pump Care" for instructions.
soft rubber
piece of valve
1. • Insert flapper valve into 3 way adapter.
Insert 3 way adapter baffle into 3 way adapter.
Do not attempt to remove the soft rubber
piece attached to the hard valve, as this may
damage the unit.
3. Press Flexi-Fit ™ Shield
on to 3-way adapter.
8 get ready for thefirstyears.com TM
2. Screw bottle into
assembled 3 way adapter.
4. Attach double end
of hose to pump.
5. Double pumping: Insert one single hose
end into each of the 3-way adapters.
Single pumping: Insert one single hose end into one 3-way
adapter. The 2nd hose end can hang freely. The pump will
function properly in single mode with the open end exposed.
Note: DO NOT lay open hose end on blanket, couch etc . while
the pump is running.
Double Pump Handle
6. When using handle for double pump,
push bottle with 3-way adapter into
opening of handle as shown until you
hear two clicks.
Cooler Bag
7. • Fill the Freezer bottle with water to
the max fill line and place in freezer
overnight.
• The Freezer bottle is contoured to fit
four 5 ounce bottles in the cooler
bag.
get ready for thefirstyears.com 9
TM