The Seat - Mutsy EVO Mode D'emploi

English
Place the carry cot (k)
· Orientate the carry cot such that it is
directed rearwards on the frame.
· Hold the carry cot by the handles on
both sides of the cot and place directly
above the adapters.
· Slide the carry cot over the adapters
and press solidly until you hear a click
on both sides.
· Check that the carry cot has been
placed horizontally and has been at-
tached properly by trying to lift it from
the frame.
remove the carry cot (l)
· Hold the carry cot by the handles on
both sides of the cot. Press and hold
the unlock buttons.
· Lift the carry cot in vertical direction of
the adapters.
remove the carry cot adapters (m)
· Pull the unlock buttons on the inside of
the adapters upwards and vertically re-
move the adapters from the attachment
points.
The hood (n)
· The hood can be unfolded by moving it
upwards.
· Push and hold the buttons on both
sides of the hood. The hood can now be
folded downwards.
The carry straps
· The carry straps must be clicked into
the plastic components in order to carry
the carry cot.
· Always ensure that the carry straps
have been removed if a child is placed
in the carry cot.
assemble the rain cover on the carry cot (o)
· Make sure that the hood of the carry cot
has been unfolded.
18
· Place the rain cover from top to bottom
over the carry cot and make sure that
the rain cover attaches well all around
the bottom of the carry cot.
The seat (6 months – 15 kg)
· The seat is suitable for children from 6
months up to 15 kg who can sit inde-
pendently.
· The seat can be folded and unfolded
with the frame and does therefore not
need to be removed from the frame.
· The back support and leg support are
adjustable.
· Make sure that the frame has fully been
unfolded and the brake blocked during
all actions indicated below.
Place the seat (p,q)
· The seat can be placed on the frame in
both directions.
· There are two foldable attachment
points on both sides of the frame. Make
sure that the attachment points are in a
vertical position.
· Stand at the front side of the frame.
· Hold the seat on both sides at the un-
lock buttons above the attachment
points and push the seat downwards
until you hear a click.
· Check that the seat has been attached
solidly by trying to lift it from the frame.
remove the seat (r)
· Stand at the front side of the frame.
· Hold the seat on both sides at the unlock
buttons and pull the buttons upwards
with your fingers. The seat can vertically
be removed from the attachment points.
Fold the frame with the seat directed for-
wards
· Stand behind the frame and make sure
that the back support of the seat is
standing upright.