The Wheels; Steering P; The Brake P; The Push Bar - Mutsy EVO Mode D'emploi

Masquer les pouces Voir aussi pour EVO:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 36
· The frame is folded in an extra compact
way if you first lock the swivelling
wheels before you fold (h).

The wheels

assemble the rear wheels (e)
· Push the button and slide the axle of
the rear wheel in the rear wheel housing
until you hear a click. Pull the wheel to
check that it has been attached firmly.
Disassemble the rear wheels (f)
· Push the button on the outside of the
rear wheel and pull the wheel from the
rear wheel housing.
assemble the front wheels (g)
· Slide the axle of the front wheel up-
wards in the front wheel housing un-
til you hear a click. Pull the wheel to
check that it has been attached firmly.
Disassemble the front wheels (g)
· Push the button on the front side of the
front wheel and pull the wheel from the
front wheel housing.
evo air: Pumping up the pneumatic tyres
using the hand pump
· Push the pump firmly onto the valve
and secure this using the clamp on the
pump. Pump up the tyres using the
hand pump that is supplied until the
desired air pressure is reached. The air
pressure in the tyres must never exceed
16 PSI / 1.1 Bar.
steering
The swivelling wheels (h)
· Turn the ring above the front wheel on
both sides inwards to lock the swivelling
wheels. The swivelling wheels will auto-
matically be locked when the wheels are
placed in the driving direction.
· Turn the ring above the front wheel on
both sides outwards to unlock the swiv-
elling wheels.
The brake (i)
· A brake pedal is available in the centre
of the rear axle. Push the pedal down-
wards with your foot to block the brake.
Push the pedal upwards with your foot
to unblock the brake.
The push bar (c)
· Push the buttons on both sides of the
push bar and turn the push bar up-
wards.
· The push bar has 4 different height po-
sitions. Release the buttons when the
push bar is in the desired position.
The carry cot (up to 9 kg)
· The carry cot is suitable for transport-
ing children from birth up to 9 kg in
a lying position. The carry cot is not
suitable for children who can sit or roll
independently or who can raise them-
selves on their hands and knees.
· You can also use the carry cot sepa-
rately from the frame.
· Regularly check the bottom, the edges
and the carry straps on the carry cot for
signs of wear and tear.
· Make sure that the frame has fully been
unfolded and the brake blocked during
all actions indicated below.
Place the carry cot adapters (j)
· There are two foldable attachment
points on both sides of the frame. Make
sure that the attachment points are in a
vertical position.
· The adapter marked with 'R' is placed
on the right side of the frame, the adapt-
er marked 'L' is placed on the left side.
· Slide the adapters in the attachment
parts and press solidly until you hear
a click.
English
17

Publicité

Table des Matières
loading

Table des Matières