Using The Grating And Slicing Discs; Using The Emulsifier - Brandt ROB506BG Manuel D'instruction

 Never allow the chopper to work for more than 2 minutes each time.
 After 2 minutes' operation allow the machine to cool for 5 minutes.
 This machine is not suitable for very hard foodstuffs such as coffee beans, ice cubes,
sugar, rice, spices, etc.
 Before mincing meat remove the bones, tendons and nerves. Do not use the machine to
chop or slice food such as tomatoes, lemons, dates, peaches or frozen products.
 Allow hot food to cool before putting it in the processor bowl.

If you want to chop different foodstuffs start with the hardest.
 Stop the processor if you see food collecting on the sides of the bowl. Remove this food
using a spatula.
b) Using the Grating and Slicing discs
Assembly
Place the bowl (3) on the motor unit (1) making sure that the parts are properly attached. Turn
the bowl (3) clockwise making sure it locks in correctly.
Insert the disc support (4) and then put the grating (9 or 10) or slicing (8) disc on the support.
Operation
 Plug in the machine.
 Put the food into the feed tube slowly. Push the food down with the pusher (6).
 Turn the switch to "ON".
 Wait until the grating or slicing disc stops completely before removing the lid from the
disc.
 Unplug the machine.
 Never allow the disc to work for more than 2 minutes each time. After 2 minutes'
operation allow the machine to cool for 5 minutes.
c)

Using the Emulsifier

Assembly
 Place the bowl (3) on the motor unit (1) making sure that the parts are properly attached.
Turn the bowl clockwise making sure it locks in correctly.
 Insert the disc support (4) and then place the emulsifier (13) on the disc support.
Operation

Plug in the machine.
 Put the food into the feed tube slowly. Push the food down with the pusher (6).
 Turn the switch to "ON".
 Wait until the emulsifier stops completely before removing the bowl from the disc.
 Unplug the machine.
20