Reverse Function - Rexel AUTO+ 60X Manuel D'utilisation

1. operation
1 Unpack the product.
2 Connect the shredder to mains supply.
Ensure the on/off switch on the back of the shredder is in the 'ON' position.
3
4 To commence shredding, move the slide switch to the Auto position (
shredder into auto mode. You are now ready to shred.
5 To load the shredder, simply lift the loading door catch to open the loading door and insert
documents. You can open the door further to 90 degrees for easier access if required. Load
up to 60 sheets at a time into the feed chamber. Do NOT fill above the MAX level, this could
damage the shredder.
The shredder will start shredding automatically ONLY after closing the loading door.
6
7 If there is still paper in the Autofeed tray after first attempt, open and re-close paper loading door
a second time.
8 If you only have up to 5 sheets to shred, you can use the manual feed slot, provided the auto
feed chamber is empty.

2. reverse function

1 Should you wish to reverse paper out whilst shredding, a reverse button (
your convenience.
2 Reverse the paper out then turn the shredder off using the ON/OFF switch at the rear of the
shredder. Remove the paper from the manual feed slot (if being used) or open the loading door,
remove the remaining stack of paper, then pull the jammed paper free of the cutting mechanism.
To resume shredding return the slide switch to the auto position (
3
using the ON/OFF switch at the rear of the shredder.
3. credit card shredding
The Auto+ 60X can shred credit cards. Switch the shredder to auto mode and insert the credit card
between the markings in the manual feed slot. Only shred one credit card at a time.
Rexel encourages customers to recycle shredded paper.
Please note that shredded paper cannot be recycled if mixed with credit card shards.
If recycling, please separate shredded paper and credit cards.
) which sets the
) has been fitted for
) and turn on the machine by
A U T O + 6 0 X ™
S H R E D D E R S
GB
9