Troubleshooting And Repair; Tools Needed; General Troubleshooting - BIG ASS FANS COLD FRONT 100 Manuel De Fonctionnement Et D'entretien

TROUBLESHOOTING AND REPAIR

Disconnect the power supply before performing any service or maintenance.
Failure to do so may result in serious injury or death.
Please use caution when troubleshooting or repairing all electrical
components. Ensure all power is disconnected from the cooler before the
pads or fan guard are removed to gain access to the fan.

Tools needed

• Screwdrivers
• Pliers
• Adjustable wrenches
• Volt/Ohm meter (electrical troubleshooting)
Additional tools may be required.

General troubleshooting

The cooler consists of three systems:
• Pump
• Water distribution system
• Fan system
Use the troubleshooting tables on the following pages to determine which
system(s) require servicing.
6
WWW.BIGASSFANS.COM
WARNING
ELECTRICAL SHOCK HAZARD
CAUTION
© 2020 DELTA T LLC ALL RIGHTS RESERVED.