Cleaning And Maintenance - Philips Satinelle HP2844 Mode D'emploi

EnglisH
10
 Place the appliance perpendicularly onto the skin with the on/off
slide pointing in the direction in which you are going to move the
appliance (Fig. 10).
5 Move the appliance slowly over the skin, against the direction of
the hair growth (Fig. 11).
Epilate your bikini line as shown in the figure (Fig. 15).
,
Epilate your underarms as shown in the figure (Fig. 16).
,
6 For a cool sensation, you can dab the area you have just epilated
with a cloth soaked in cold water.

cleaning and maintenance

Never use scouring pads, abrasive cleaning agents or aggressive liquids
such as petrol or acetone to clean the appliance.
- Never rinse the appliance or the adapter under the tap (Fig. 17).
- Keep the appliance and the adapter dry (Fig. 18).
cleaning the epilating head
1 Switch off the appliance, remove the adapter from the wall socket
and pull the appliance plug out of the appliance (Fig. 19).
 Remove the epilating head (Fig. 0).
 Remove loose hairs with the brush supplied (Fig. 1).
 Rinse the epilating head under the tap for 5-10 seconds while
turning it (Fig. ).
5 Shake the epilating head firmly and dry it thoroughly with a tea
towel. (Fig. )
Note: Make sure the epilating head is dry before you place it back onto the
appliance.
Environment
- Do not throw away the appliance with the normal household waste
at the end of its life, but hand it in at an official collection point for