Switching The Appliance On - Rowenta PU4010F0 Mode D'emploi

SWITCHING THE APPLIANCE ON

Connect the power cord and press the start button (6).
When you switch on your appliance, it will be automatically set to speed 2, the optimum operating
speed.
OPERATION
START
Briefly press this button to switch the air purifier on or off.
FILTRATION SPEED SELECTION
This appliance has 4 filtration speeds. You can change these speeds as you wish or according to
the time of day.
- Speed 1 is specially adapted for nighttime operation – for extra-silent air purification.
- Speed 2 is the optimum operating speed, combining performance and silence.
- Speeds 3 and 4 purify the air faster, for times when pollution levels are high.
LIGHT
You can change the light intensity of the appliance as you wish or according to the time of day.
Press
1
2
3
(PU6010
only)
TIMER / DELAYED START
If the appliance is on: you can use this button to define the operating duration. Briefly press
the button to select the number of operating hours desired (1, 2, 4 or 8) and the appliance will
automatically turn off at the end of the selected period.
If the appliance is off: briefly press the button to set the appliance to turn on in a certain number
of hours (1, 2, 4 or 8).
3D PURE AIR FUNCTION (adjustable grid)
You can adjust the position of the air outlet grid manually, as desired. For an optimum, even flow
of purified air in the room, set the angle to 45°; for maximum comfort, set the angle to 90°.
MAINTENANCE
Always switch the appliance off with the button (6) and unplug it before conducting any
maintenance operation.
You can clean the appliance with a slightly damp cloth.
IMPORTANT: Never use abrasive products which could damage your appliance's appearance.
Ambient light
(PU6010 only)
Light up
Moderate light
Off
Control panel
Light up
Moderate light
Moderate light
EN
7