Safety Tips - Rowenta PU4010F0 Mode D'emploi

DESCRIPTION
Product description
A Ambient light
(PU6010 only)
B Adjustable air outlet grid
C Control panel
D Front door
E Handle
F Air inlets
G Power cord outlet
Read the instructions for use and safety carefully before use and keep them for future reference.

SAFETY TIPS

It is essential that you read these instructions carefully and observe the following recommendations:
•
For your safety, this appliance complies with the applicable
standards and regulations (low voltage, electromagnetic
compatibility, environmental directives, etc.).
•
This appliance should not be used by persons (including children)
with reduced physical, sensory or mental capacities or lack of
experience and knowledge, unless they are supervised or have
been given instructions beforehand concerning use of the appliance
by a person responsible for their safety.
•
Children should be supervised to ensure they do not play with the
appliance.
•
The appliance can be used by children aged 8 and over and persons
with a lack of experience or knowledge or reduced physical,
sensory or mental capacities, provided they are supervised, have
been trained on the safe use of the appliance and are aware of the
risks involved. Children must not play with the appliance.
•
If the power cord is damaged, it must be replaced by the
manufacturer, its after-sales service or a similarly qualified person
so as to avoid any danger.
•
Children should not clean or perform maintenance on the appliance
without being supervised.
•
For maintenance operations, please refer to the "Maintenance"
section.
•
Keep the appliance and its power cord out of the reach of children
aged under 8.
• This appliance is designed for domestic use only. It should not be used for industrial purposes.
• The warranty will be invalidated if damage occurs due to incorrect use.
• Do not operate this appliance in a very dusty and/or humid place or in a location with fire hazards.
4
Control panel Lights
1 Filter replacement indicator
2 Filtration speed
3 Timer / delayed start
Control buttons
4 Light
5 Filter reset
6 Start
7 Mode/filtration speed
selection
8 Timer / delayed start set-
ting