Philips YS534 Mode D'emploi page 15

Do not clean more than one cutter and shaving guard at a time, since they
are all matching sets. If you accidentally put a cutter in the wrong shaving
guard, it may take several weeks before optimal shaving performance is
restored.
6 Clean the cutter with the cleaning brush supplied (Fig. 26).
7 Clean the inside of the shaving guard (Fig. 27).
You can also clean the cutter and its guard under a tap of hot water.
8 After cleaning, place the shaving guard back into the shaving head
holder. Make sure the two wings fit exactly into the recesses of the
shaving head holder (Fig. 28).
9 Place the cutter back into the shaving guard with the cutter legs
pointing downwards.
10 Place the retaining ring back onto the shaving head holder (1).
To reattach the retaining ring, turn it against the direction of the
arrows indicated in and on the retaining ring (2) (Fig. 29).
Make sure the retaining ring is fixed properly. The four wings of the retaining
ring have to be located exactly under the recesses of the shaving head holder.
Repeat step 1-10 for the other shaving heads.
11 Reattach the shaving unit to the shaving attachment.
If the shaving unit cannot be reattached smoothly, check if you have
positioned the shaving heads properly and if the retaining rings are fixed
properly.
cleaning the body groomer attachment
1 Switch off the appliance.
2 If a trimming comb is still attached, remove it.
You can either push the trimming comb off the appliance or pull it off,
depending on how the comb is placed on the appliance.
3 Pull the body groomer foil off the appliance (Fig. 30).
EngliSh
15