ASSEMBLY INSTRUCTION
Step 3.
EMERGENCY STOP
Before beginning a workout session
ensure that the Safety Tether Key is
properly placed onto the Computer
Console and the Safety Clip is securely
attached to an article of your clothing. If
you fall the clip will pull out the SAFETY
KEY from the Computer Console and
the running belt will stop immediately for
emergency stop, helping to prevent injury.
Replace the Safety Tether Key onto the Computer Console. Press the START button to
begin exercise again.
(cont.)
OPERATION INSTRUCTIONS
TIME
No Set Target Time - TIME will count up from 00:00 to maximum
99:00 with each increments is one minute.
Using Set Target Time - TIME will count down from Preset Value.
Each preset Increment is one minute between 5:00 to 99:00
minutes.
SPEED
Display current training speed from 1.0 to a maximum of 20.0 km/h.
DISTANCE
No Set Target Distance - DISTANCE will count up from 0.00 to a
maximum of 99.5km with each increment 0.1 KM.
Using Set Target Distance - DISTANCE will count down from preset
Value. Each preset increment is 0.5 KM between 0.5 to 99.5.
CALORIES
No Set Target Calories - CALORIES will count up from zero to
maximum
995 with each increment 1 cal.
Using Set Target Calories - CALORIES will count down from preset
value. Each preset increment is 5 cal from 10 to 995 cal.
PULSE
Hold the hand sensor tight and the console will detect your pulse
signal. When monitor is reading your heart tare signal, the HEART
SYMBOL will flash on the console.