DIRECTIONS FOR USE
In order to avoid an accident, please ensure you
have the treadmill safety key securely attached to
your clothing. In the event, that you accidently trip
or slip whilst walking or running on the treadmill,
removing the safety key from the console will ensure
the power is paused to the motor bringing the belt
to a stop. Re-attach the safety key to commence
your workout.
When exercising on the treadmill concentrate on looking straight
ahead and not at your feet, to avoid any risk of tripping or falling.
Increase the speed gradually allowing yourself to adapt to the speed
setting before making any further speed adjustments.
To pause or stop your treadmill use the emergency stop button or
safety key when necessary. Once you have completed installation of
the treadmill and the motor cover is securely on, you may plug in the
power cord. It is recommended you use a good quality surge protector
device.
DIRECTIONS FOR USE
1.
Position the treadmill on a clean and level surface, close to a dedicated
wall socket power point. A rubber floor mat is recommended to assist with
maintenance and protection of your floor.
2.
For your safety, never start the treadmill while you are standing on the running
belt. Place your feet on either side of the running belt side rails and press the
start button. Increase the speed gradually to the desired speed level before
standing on the belt surface.
3.
Wear appropriate clothing and footwear when exercising on the treadmill. Do not
wear long, loose fitting clothing that could become caught in any of the moving
parts of the treadmill.
4.
Always wear the safety key attachment.
5.
The motor cover should never be removed while in use. A qualified electrical
technician must be in attendance should any maintenance work need to be
carried out. Always unplug the power cord should the cover ever need to be
removed for maintenance reasons.
6.
Young children should be kept away from the treadmill whilst it is in use to avoid
injury and safety concerns.
(cont.)