Failsafe (F/S); Neutral - GM Racing 94004 Manuel D'utilisation

3. Use the +/- Key to change the value.
4 . Press EXIT twice to save and return to FUNCTION MENU, press EXIT again to
return to the Main Screen.
TERMS: VALUE -- Throttle hold position. Range: -120% to +120%.

5.14. FAILSAFE (F/S)

If the RF signal loss, it should occur the receiver adjust the Steering or Throttle or both
to a preset value. The servo value of Steering channel and Throttle channel in the fail
status can be set through fail safe function.
1. Press "ENTER" to see FUNCTION MENU.
2. Use the +/- Keys to select the F/S function and press ENTER.
3. Press ENTER to select a item.
4. Use the +/- Key to change the value.
5. Press EXIT twice to save and return to FUNCTION MENU, press EXIT again to
return to the Main Screen.
TERMS:
ST -- To set the servo value of Steering channel. Range -120% to +120%. Default: 0%.

5.15. NEUTRAL

This function can calibrate the neutral of the STEERING wheel or THROTTLE trigger.
1. Press "ENTER" to see FUNCTION MENU.
2. Use the +/- Keys to select the NEUTRAL function and press ENTER.
3. Use the +/- Keys to select YES.
4. Press ENTER to calibrate the neutral.
5. Press EXIT twice to save and return to FUNCTION MENU, press EXIT again to return to
the Main Screen.
Note: Don't move the STEERING wheel or THROTTLE trigger in the calibrate procedure.
35 94004 GM-Racing XG-6i 2.0 FHSS Race Spec