Servo Speed (Spd) - GM Racing 94004 Manuel D'utilisation

5.9. SERVO SPEED (SPD)

This function include tow items: STEERING SPEED and THROTTLE SPEED.
1. Press "ENTER" to see FUNCTION MENU
2. Use the +/- Keys to select the SPEED function and press ENTER.
3. Press ENTER to select a setting.
4. Use the +/- Key to change the value.
5. Press EXIT twice to save and return to FUNCTION MENU, press EXIT again to
return to the Main Screen.
Quick steering operation will cause momentary under steering, loss of speed, or spinning.
This function is effective in such cases. This function limits the maximum speed of the steering
servo. (Delay function)
- The steering speed when the steering wheel is operated (TURN direction) and returned
(RETN direction) can be independently set.
- If the steering wheel is turned slower than the set speed, the steering servo is not affected.
2.THROTTLE SPEED
- Sudden throttle trigger operation on a slippery road only causes the wheels to spin and the
vehicle cannot accelerate smoothly. Setting the throttle speed function reduces wasteful
battery consumption while at the same time permitting smooth, enjoyable operation.
- Throttle servo (amp) operation is delayed so that the drive wheels will not spin even if the
throttle trigger is operated more than necessary. This delay function is not performed when
the throttle trigger is returned and at brake operation.
Adjustment:
1. Select the TH button by +/- Keys.
2. Press Enter to select SPD. FL item.
3. Use +/- Keys change the value.
4. Press exit twice return to the function menu.
TERMS:
SPD.FL- SPEED FORWARD DELAY.
SPD.Bk- SPEED BACKWARD DELAY.
94004 GM-Racing XG-6i 2.0 FHSS Race Spec
Range:0~100%, default:0
Range:0~100%, default:0
32