Little Tikes Perfect Fit 4-in-1 Trike Mode D'emploi page 4

The right wheel and right brake have two lines (=). The left wheel and left brake have one line (-).
Inside the wheels and under the brakes are R and L indicators for right and left.
1
B
M2
Align screw openings on
brake (M2) with openings
on trike axle (B).
3
J2
M2
SLOT
PEG
I
5
I
M1
J1
B
Repeat assembly for right
brake (M1) and wheel (J1).
4
2
slot
B
L
R
Inside of wheel (J2)
Align slots on wheel center (J2) with slots on axle (B).
T1 x 2
4
J2
I
L
B
Align openings on axle (B),
brake (M2) and axle cap (I).
Then, screw together.
M2
6 T1 x 2
J1
R
B
Align openings on axle (B),
brake (M1) and axle cap (I).
Then, screw together.
2
Remove sun shade
ENGAGE PEDALS FOR POSITION 4
4
I
Push in button. Then, slide to move. Rotate the
front pedal if the button does not fully slide.
M1
POSITION 4 - TRIKE
Lock both rear brakes
when parked.
1
Undo the clip under the seat and remove seat belt.
3
5
disengage pedals
engage pedals
Pull down seat lock lever on trike frame (A). Then, slide the seat to the
desired position. Press the seat lock lever up to lock the seat in place.
Remove seat back
A
seat lock
lever
13