Operating the oven
Extra features
Thermostat adjustment
The temperature in the oven has been
preset at the factory. When first using the
oven, be sure to follow recipe times and
temperatures. If you think the oven is too
hot or too cool, the temperature in the oven
can be adjusted. Before adjusting, test a
recipe by using a temperature setting that
is higher or lower than the recommended
temperature. The baking results should help
you to decide how much of an adjustment is
needed.
The oven temperature can be adjusted
±35 °F (±19°C).
How to adjust the oven temperature
1. Press Broil and 1 at the same time for
3 seconds.
The display will show AdJ 0.
2. Enter the adjustment you want, eg. 20 °F,
using the number pad.
You can adjust the temperature so that
it is lower than the factory setting by
pressing Broil.
3. Press START/SET.
NOTE
This adjustment will not affect the broiling
or the self-cleaning temperatures. The
adjustment will be retained in memory after
a power failure.
54 English
NE59J7850WS_AA_DG68-00600A-01_EN.indd 54
Fahrenheit or Celsius temperature
selection
The oven control can be programmed to
display temperatures in Fahrenheit or
Centigrade. The oven has been preset at the
factory to display in Fahrenheit.
How to change the display from Fahrenheit
to Centigrade or from Centigrade to
Fahrenheit
1. Press Broil and 2 at the same time for
3 seconds.
The display shows F (Fahrenheit) or C
(Centigrade).
The default is F.
2. Press 0 to select F or C.
Pressing 0 changes the display between
F and C.
3. Press START/SET.
Convection auto conversion feature
When you use the auto conversion feature,
the convection auto conversion feature
will automatically convert entered regular
baking temperatures to convection baking
temperatures.
If this feature is activated, the display
will show the actual converted (reduced)
temperature. For example, if you enter a
regular recipe temperature of 350 °F and
press START/SET, the display will show the
converted temperature of 325 °F.
2015-04-23
10:32:06