Important safety instructions
• Before operating the self-clean cycle, wipe grease and food soils from
the oven. Excessive amounts of grease may ignite, leading to smoke
damage to your home.
• Do not use any commercial oven cleaner or oven liner protective
coating of any kind in or on the outside of the oven.
• Remove the nickel oven shelves from the oven before you begin the
self cleaning cycle or they may discolor.
• If the self-clean mode malfunctions, turn the oven off and disconnect
the power supply. Have it serviced by a qualified technician.
• Excess spillage must be removed before you run the self cleaning cycle.
Ventilating hood
• Clean ventilating hoods frequently. Do not let grease accumulate on the
hood or filter.
• When flaming foods under the hood, turn the fan on.
Glass/Ceramic cooking surfaces
• DO NOT TOUCH SURFACE UNITS OR AREAS NEAR UNITS.
Surface units may be hot even though they are dark in color. Areas near
surface units may become hot enough to cause burns. During and after
use, do not touch, or let clothing or other flammable materials contact
the surface units or areas near the units until they have had sufficient
time to cool. Among these areas are the cook-top and the facing of the
cook-top.
• Do not cook on a broken cooktop. If the cooktop should break, cleaning
solutions and spillovers may penetrate the broken cook-top and create
a risk of electric shock. Contact a qualified technician immediately.
Clean the cooktop with caution. If a wet sponge or cloth is used to wipe
spills on a hot cooking area, be careful to avoid steam burns. Some
cleaners can produce noxious fumes if applied to a hot surface.
14 English
NE59J7850WS_AA_DG68-00600A-01_EN.indd 14
2015-04-23
10:31:55