2.1
Representation and layout of warning instructions
The warning instructions relate to actions and are structured as
follows:
WARNING
Type and source of danger!
Explanations on the type and source of danger.
f
Measures to prevent danger.
A warning indicates possible risk of lethal or serious injuries.
2.2
Limitations of use
f Observe the following requirements for the operational
environment:
•
The suspended ceiling height must be sufficient in order to
ensure that there is enough insulation above the SpotClip-Box.
•
As the installation is partially carried out from above the
suspended ceiling, for this purpose, there must either be access
to this or the assembly must be carried out before the ceiling is
installed.
•
Can be used for LED and fluorescent lights with external
transformers. Not suitable for halogen lamps.
•
The available inner usable height is 130 mm.
•
Can be used for ceiling cut-outs with diameters of up to 75 mm.
•
Can be used with voltages of 230 V and 12 V.
•
Not suitable for the protection of converters or transformers.
These must be installed outside the SpotClip-Box, where
overheating can also not occur.
•
Can be used up to IP protection class 65.
Operating Instructions • SpotClip-Box • 12-2016
Safety instructions
5