User Information; Intended Use - HellermannTyton SpotClip-Box Manuel D'utilisation

User information

Operating Instructions
1 User information
These operating instructions only apply for the SpotClip-Box
spacer product and are intended for the user. The user must
carefully read and understand the operating instructions before
commissioning the product. On the fold-out page of the
operating instructions, you will find figures providing an
overview and for the assembly of the product, along with
contact details for your local HellermannTyton country
representative.
1.1

Intended use

The SpotClip-Box spacer for downlight covers ensure a safety
distance between the light, damp-proof foil or vapour barrier
and the insulation wool. The product reduces the risk of
overheating and a fire. It also increases the service life of the
lights. The product is made of self-extinguishing, heat-stabilised
polyamide. The product is designed to reduce the heat loss to a
minimum and to increase the energy efficiency. The SpotClip-
Box is suitable both for use in panels as well as in plasterboard.
The product may only be used for the purposes described in
these operating instructions.
The product may only be used in technically perfect condition in
accordance with its intended use and the operating instructions
and only by safety-conscious persons who are fully aware of the
risks involved.
Operating Instructions • SpotClip-Box • 12-2016
3