Cleaning & Maintenance; Cleaning The Soleplate - HAEGER NEW TAILOR 1.2 Mode D'emploi

Cleaning & Maintenance
After each use
1. Turn the power off and remove the Plug from the power outlet.
2. Allow the iron to cool before winding the cord around the built-in cord wrap.
Storage
Always store the iron on its heel rest.
NOTE: Do not store the iron with the soleplate facing down, or in the carton.
Cord wrap facility -The built-in cord wrap facility allows you to wind the cord around the heel for neat and tidy
storage of the cord when the iron is not in use.
Cleaning
To clean the exterior of your iron, wipe over with a damp soft cloth and wipe dry.
Caution: Do not use harsh abrasives, chemical cleaners or solvents to clean the exterior of your iron as these will
damage the surface.

Cleaning the soleplate

The non-stick coating reduces sticking of fabrics and scratches to the soleplate. Do not iron over sharp objects such
as buttons, studs and zippers, as these will scratch the surface.
Wipe the soleplate with a damp soft cloth after each use. If polyester has burnt to the soleplate, iron a damp
cotton cloth while hot.
Caution: Do not use scouring pads, abrasives or harsh cleaners to clean your soleplate, as these will scratch and
damage the surface.
Instructions for use
English
5