English - Tyco Healthcare RADIONICS LUMINANT LL01 Instructions D'utilisation

Description
The Radionics
TM
design, and is compatible in both MR and CT imaging applications.
Designed as a simple attachment for the Radionics
Head Ring Assembly (UCHRA) during standard MR or CT imaging,
the Luminant localizer can be used with a variety of Radionics
TM
ware products.
Components
Part Number
LL01
LL02
LL03INC
Compatibility
The Luminant MR/CT localizer is compatible with the following Radi-
TM
onics software products:
XKnife RT ver. 2.1.3 or higher
TM
StereoPlan
StereoCalc
OmniSight
Assembly
1. Remove the Luminant
captured thumbscrews (this is an optional step that may facilitate
localizer attachment to UCHRA).
2. Position the Luminant
the UCHRA intubation hoop (without the Arc Adapter installed).
3. Secure the Luminant
ment screws.
4. If the posterior panel was removed, reattach it by fitting the bottom
of the panel over the pins on the base of the localizer. Secure the
panel by tightening the captured thumbscrews into the correspond-
Luminant
TM
Luminant localizer features an open and lightweight
TM
Description
Localizer with storage case
Storage case only
One factory service, inspection and calibration
2.1.1
TM
1.2
TM
ver. 1.1 or higher
TM
localizer posterior panel using the two
TM
localizer so that the anterior panel is above
TM
localizer to the UCHRA with the four attach-
TM
MR/CT Localizer
E
NGLISH
Universal Compact
TM
soft-
TM
EN
1