Thank You; Getting Started; Charge Your Headset - Jabra JX10 Manuel D'utilisation

Thank you

Thank you for purchasing the Jabra JX0 Bluetooth® Headset . We hope you enjoy it!
This instruction manual will get you started and ready to make the most of your headset .
!
Remember, driving comes first, not the call!
Using a mobile phone while driving can distract you and increase the likelihood of an
accident . If driving conditions demand it (such as bad weather, high traffic density,
presence of children in the car, difficult road conditions), pull off the road and park
before making or answering calls . Also, try to keep conversations short and do not make
notes or read documents .
Always drive safely and follow local laws.
About your Jabra JX10
1. LED light
• Blue indicates mode (pairing, active or standby)
• Red/green indicates battery level (low, charging, or charged)
2. Volume up (+), volume down (-)
3. Charging socket
4. Pairing button – press to put headset
into pairing mode
5. Answer/end button
• Press to turn headset on
(blue flash burst indicates success)
• Press and hold to turn headset off
(blue flash burst indicates success)
• Tap to answer or end a call
2
What your headset can do
Your Jabra JX10 lets you do all this (dependent on your phone supporting the function:
• Answer calls
• End calls
• Reject calls*
• Voice dialling*
• Last number redialling*
• Call waiting*
• Put call on hold*
* Phone dependent
Specifications
• Up to 6 hours talk time/standby time up to 200 hours
• Rechargeable battery with charging option from AC power supply, PC via USB
cable, desktop charger or car charger (not included)
• Less than 0 grams
• Operating range up to 0 metres (approx . 33 feet)
• Headset and hands-free Bluetooth profiles
• Bluetooth specification (see glossary) version  . 2

GETTING STARTED

The Jabra JX0 is easy to operate . The answer/end button on the headset performs
different functions depending on how long you press it .
Instruction: Duration of press:
Tap Press briefly
Press Approx:  second
Press and hold Approx: 5 seconds
1

Charge your headset

Make sure that your Jabra JX0 headset is fully charged before you start using it . Use the
AC adaptor to charge from a power socket, or charge directly from your PC with the USB
cable provided . Connect your headset as shown in fig . 2 . When the LED is solid red, your
headset is charging . It may take up to five minutes for the solid red light to appear if the
battery is completely empty . When the LED is green, it is fully charged .
3