Preparation Of Gun - Komet Twin SR140 ULTRA Manuel Technique

Preparation of Gun
The timer for the Komet Inverter is not preinstalled and must be installed prior to usage:
Turn gun to the side.
Install the timer with the 4 supplied Allen screws (M4 x 12).
Make sure that the plug is facing downwards.
Connect the plug and screw it in tight.
6
6
Unlock the lid of the timer with a flat screwdriver by
TURNING the screwdriver, then remove the lid.
Reinstall the lid and lock it securely.
A
B
Move the inverter circuit from left to right (A), make sure
that cable (B) does not get under tension.