Transferring Pictures To A Computer - Olympus CAMEDIA C-40ZOOM Manuel De Base

TRANSFERRING PICTURES TO A COMPUTER

By connecting the camera to a computer with the provided USB cable,
images on a card can be transferred to the computer. Some OS's (operating
systems) may need a special setup when connecting to the camera for the
first time. Follow the chart below.
Identifying the OS
Windows 2000
Mac OS 9.0 - 9.1
Windows 98/98 SE
Professional/Me
Connecting the camera to a computer using the USB cable
Read the provided
"SOFTWARE
INSTALLATION
GUIDE".
Refer to the software CD's instruction on CD-ROM.
Even if your computer has a USB connector, data transfer may not function correctly if you
are using one of the operating systems listed below or if you have an add-on USB
connector (extension card, etc.).
● Windows 95/NT 4.0
● Windows 98 upgrade from Windows 95
● Mac OS 8.6 or lower (except Mac OS 8.6 equipped with USB MASS Storage support
1.3.5 installed at the factory)
● Data transfer is not guaranteed on a homemade PC system.
Note
on using CAMEDIA Master 2.5 software
● When using CAMEDIA Master 2.5, click on "Removable Disk", not "My
Camera". Under Mac OS, the disk drive will be labeled "Untitled".
● To use CAMEDIA Master software, read its instructions.
40