Connecting A Tv Using An Hdmi Cable - Samsung HW-M550 Mode D'emploi

Auto Power Link
Auto Power Link automatically turns on the Soundbar when the TV is turned on.
1. Connect the Soundbar and a TV with a digital optical cable.
2. Press the (Source) button on the right side panel or on the remote control, and then select
"D.IN".
3. Press the Left button on the remote control for 5 seconds to turn Auto Power
Link on or off.
• Auto Power Link is set to ON by default.
(To turn off this function, turn off Auto Power using the Soundbar.)
• Depending on the connected device, Auto Power Link may not function.
• This function is only available in the "D.IN" mode.

Connecting a TV using an HDMI Cable

HDMI IN port of your TV.
1. With the Soundbar and TV turned on, connect the HDMI cable (not supplied) as shown in the figure.
2. "TV ARC" appears in the display window of the Soundbar main unit and the Soundbar plays TV
sound.
• If TV sound is inaudible, press the
of the Soundbar to switch to "D.IN" mode. The screen displays "D.IN" and "TV ARC" in sequence,
and TV sound is played.
Check the (ARC) at
HDMI IN
(ARC)
(not supplied)
Check the HDMI OUT (TV-ARC) port of

HDMI Cable
the Soundbar main unit.
TV ARC

(Source) button on the remote control or on the right side
ENG - 10
Bottom of Soundbar
HDMI IN
HDMI OUT
(TV-ARC)
Right Side of the Soundbar