Exhaust System - Horizon Hobby LOSR1900 Manuel D'instructions

Always check that the fuel supply circuit is
perfectly sealed.
Always tune
adjustments; engines are highly sensitive to
carburetion settings.
GLOW PLUG
Engines are sensitive to the glow plug type and weather
conditions. We suggest you to always use Team Orion glow
plugs to achieve the best performance and a stable running.
Install the glow plug carefully. Use a proper tool when you
change the glow plug, make sure the glow plug is correctly
inserted into the thread before tightening it.
Check the glow plug and filament regularly; unexpected
engine stalling or irregular running can be caused by the
oxidation or wear of the filament. The spiral shaped filament
must have a bright silver colour (and glow brilliant orange
when connected to glow starter).
A broken, impacted or missing filament is a serious condition
which requires thorough inspection of the engine. The loss of
the spiral filament can be caused by the mixture being too
36
the engine with small
lean or the engine running too hot. Top end needle is
screwed too far in. The engine needs more fuel.
If not corrected, a damaged glow plug or filament issue will
lead to permanent damage to the engine.
There are two kinds of glow plugs – standard and turbo; the
choice depends on the engine type and application.

EXHAUST SYSTEM

The exhaust system has two functions: it helps to reach the
best performance and reduces the noise levels produced by
the engine. We suggest that you only use original Team
Orion exhaust systems.
While assembling, be careful to align all the parts correctly.
Any mechanical stress on the exhaust system connections will
cause a leak. Exhaust leaks
performance and will make the engine difficult to tune.
Regularly check all the parts and substitute
them if they are damaged or worn.
37
will cause inconsistent