Eng; Operation; Setting The Target Temperature; Navigation And Settings - Alpha IP RD 40203 Mode D'emploi

4 Operation

WARNING
Danger to life in case of swallowing!
The rotary control can be taken off; children might swallow it.
¾ Do not lay down the rotary control near children.
4.1

Setting the target temperature

The target temperature is set by turning the rotary control
- +
to the left or to the right. Rotating to the left decreases the
temperature, rotating to the right increases it.
Comfort temperatures for day and night operation can be
stored. A manual or automatic change between the oper-
ating modes day and night operation changes to the stored
temperature. The target temperature can be changed with
the rotary control, independent from the active operating
mode. You can find more information in section Lifestyle
functions menu.
4.2

Navigation and settings

The navigation and settings of the room thermostat are performed
with the rotary control:
By pressing the rotary control, menus are opened and func-
tions are activated, and changed settings are applied.
By rotating the rotary control, settings can be done and
- +
functions and menus can be chosen.
DEU

ENG

ENG
FRA
NDL
ITA
ESP
31