Installing The Mcs Ii - N-Com MCS II Sécurité Et Instructions D'utilisation

3. INSTALLING THE MCS II

Fig. 1
Fig. 3
Fig. 2
Remove

protection plate located on
the helmet shell (Fig. 1) and
open the helmet chin guard
(flip up helmets).
Remove the right and left

cheek pads from the helmet
(see specific
provided in the user manual
of the helmet).
Remove the Noise Reducers

from the two cheek pads, and
tear off the pre-cut plastic (if
equipped).
the "N-Com"
instructions
7