N-Com MCS II Sécurité Et Instructions D'utilisation page 15

Fig. 21
Fig. 22
Position the comfort padding in its housing (see specific instructions

provided in the helmet user manual), hooking the neck roll (Fig. 22).
Position both the comfort cheek pads in their housing (see specific

instructions provided in the helmet user manual) making sure that all
the press-studs click.
ONLY FOR FULL-FACE HELMETS
Insert the chin guard (microphone
side), gently placing the microphone
in its housing. Then press down on
the red tab until the chin guard is
locked in place on the helmet. (Fig.
21)
Fig. 23
15