Remote Control Panel - Franke FGB 906 W AC Mode D'emploi Et Installation

REMOTE CONTROL (OPTIONAL)
The appliance can be controlled using a remote control
powered by a 1.5 V carbon-zinc alkaline batteries of the
standard LR03-AAA type (not included).
• Do not place the remote control near to heat sources.
• Used batteries must be disposed of in the proper
manner.
Motor
Intensive
Anti-
condensatio
n
24H/ Delay
Light
EN

Remote control panel

Motor On / Off.
Decreases the working speed each time it is pressed.
Increases the working speed each time it is pressed.
Activates/Deactivates the Intensive function
Brief pressure:
Activates/Deactivates the Anti-condensation heating
Long pressure:
elements.
Brief pressure: Activates/Deactivates the Delay function: automatic switch-off
with a 30' delay. The display shows the operating speed and the dot at the bottom
right flashes once a second.
Press and hold for 2 seconds to Activate/Deactivate the 24h function: this starts
the motor at speed one and allows suction for 10 minutes every hour. The display
shows the number 24 and the dot at the bottom right flashes once a second.
Brief pressure: Lights On / Off
Pressed for 2 Seconds: Courtesy lights On / Off
9 9