Cleaning And Disinfecting; Applied Standards - HoMedics JUMBO DISPLAY Manuel

CLEANING AND DISINFECTING

For home use device disinfection, 70% Ethanol or Isopropyl
alcohol (available in the pharmacy) can be used.
Clean the measuring sensor after each use.
Use a clean cloth or cotton bud that can be moistened with
70 % alcohol.
Lens/ Measurement Sensor
Gently clean with an alcohol swab.
Do not use water to wash the thermometer lens directly.
Thermometer
Clean with a soft, dry cloth.
Do not use water to rinse the device.

APPLIED STANDARDS

This product conforms to the provisions of the EC directive MDD(93/ 42/ EEC).
The following standards apply to design and/or manufacture of the products:
ISO 80601-2-56
Medical electrical equipment -- Part 2-56: Particular requirements for basic safety and
essential performance of clinical thermometers for body temperature measurement
IEC/EN 60601-1
Medical electrical equipment- Part 1: General requirement for safety
IEC/EN 60601-1-2
Medical electrical equipment- Part 2: Collateral standard: Electromagnetic compatibility
- Requirements and tests
IEC/EN 60601-1-11
Medical electrical equipment - Part 1-11: General requirements for basic safety and
essential performance - Collateral standard: Requirements for medical electrical
equipment and medical electrical systems used in the home healthcare environment
GB | 7