Memory Function - HoMedics JUMBO DISPLAY Manuel

Note:
7. To ensure accuracy, please wait at least 1 minute between successive readings.
8. Clean the thermometer lens again after use. After cleaning, wait at least
10 minutes between readings, to ensure accuracy.
The readings
If the temperature measurement is below 38°C (100.4°C),
a smiling face will be appear next to the reading.
If the reading is 38°C (100.4°C) or above, a
frowning face will be displayed.
If 'Lo' is displayed, you may need to check that the
thermometer is in direct contact with the ear canal
CHANGING THE MEASUREMENT UNIT (ºC/ºF)
Changing °C/ °F, please make sure the device is in power on condition. Press the Power &
Measure and Memory Recall buttons together to toggle between °C and °F.

MEMORY FUNCTION

You can recall up to 10 stored measurements in memory to share with your doctor or
trained healthcare professional.
1. Press the Memory Recall button. The first
reading displayed is the latest measurement
stored in memory.
2. Continue to press the Memory Recall button
button to view the next previously stored
measurement.
3. Any new measurement will be recorded and the
oldest memory deleted without you having to do
anything.
6 | GB