Camera Setup - Smartwares CS97DVR Instructions D'installation Et D'utilisation

Camera Setup

This section allows you to add the camera, if you have purchased additional cameras or change
original camera channel. Also you can enable/disable each camera connected to the receiver.
For better performance, you can setup the camera's resolution and video quality individually.
Pair the camera to CS97DVR
1. Tap the camera setup icon to access the camera pairing screen.
2. Select the Camera channel (Camera 1/2/3/4).
3. Tap the "Camera Pairing" icon.
4. Within 35 seconds, press and hold the pairing button on the back of the camera for 2 seconds.
The Green Link LED will light up which indicate the camera is paired successfully.
NOTE: Once pairing is completed, the system will automatically restart upon leaving the
MAIN MENU.
Main Menu
Camera Setup
Icon Main Function
1 CAMERA PAIRING
CAMERA
2
ACTIVATION
Setup Description
Pairing the camera to CS97DVR is needed when
‧ Purchase of additional camera(s).
‧ Change original camera channel.
Enable/Disable camera connection for camera(s)
paired to the CS97DVR. If you disable the camera
connection, live video streaming of that particular
camera will no longer be available during the LIVE
VIEW mode and there won't be any recording
events from this camera.
Camera On
18
Camera Off