Precautions - Gree XK64 Manuel De L'utilisateur

Controller For The Air Source Heat Pump Water Heater

7. Precautions

(1) Do not perform operations to the controller with wet hands.
(2) Do not install the wired controller at a wet place.
(3) Do not beat, throw, or frequently disassemble and assemble the wired
controller.
(4) The water outlet temperature of the water tank is set to 50° C before delivery.
Users can adjust the temperature as required when the unit is running. However, if the
temperature is too high, the coefficient of performance (COP) decreases.
(5) When the temperature setpoint is achieved, the unit stops automatically and the
wired controller displays the KEEP icon. If the water temperature at the water
acquisition position or at the bottom of the water tank decreases by 5° C to 10° C, the
unit will start to heat up water again.
20