Cleaning Upholstery - POLTI Vaporetto PRO 95 TURBO FLEXI Manuel D'instructions

7. CLEANING UPHOLSTERY

(mattresses, sofas, car interiors, etc.)
WARNING: Before cleaning leather or fabrics with steam,
consult the manufacturer's instructions and always carry out a
test on a hidden area or on a sample of the material. Allow the
steamed part to dry to make sure that no changes in colour or
deformations have occurred.
7.1 Make sure that section 1 has been followed and connect the
accessories as indicated in section 2.
7.2 Connect the small brush to the hose.
7.3 Attach the sockette to the small brush.
7.4 Adjust the intensity of the steam by turning the adjustment
knob (5); for this type of surface we recommend Minimum level
of steam.
7.5 Ensure that the steam lock on the handle is deactivated (6).
7.6 Press and hold the steam trigger on the handle of the steam
hose (6) and pass over the surface.
8. CLEANING FURNITURE AND DELICATE
SURFACES
WARNING: Do not direct the steam jet directly onto surfaces.
Before cleaning the surface, always do a test on a hidden area
and see how it reacts to the application of steam.
8.1 Ensure that section 1 has been followed.
8.2 Adjust the intensity of the steam by turning the adjustment
knob (5); for this type of surface we recommend Minimum level
of steam.
8.3 Ensure that the steam lock on the handle is deactivated (6).
8.4 Press and hold the steam lever on the handle of the steam
hose (6) and direct the jet onto a cloth (Vaporetto Microfibre
Cloths for manual use PAEU0231).
8.5 Use the cloth previously steamed to clean the surface,
avoiding prolonged use on the same spot.
9. CLEANING BATHROOM FIXTURES,
GROUTING AND KITCHEN WORKTOPS
9.1 Make sure that section 1 has been followed and connect the
accessories as indicated in section 2.
9.2 Connect the concentrator accessory, equipped with bristly
round brush, to the hose. For the Pro 95_Turbo Flexi model the
steam lance can be attached to the concentrator accessory. This
is recommended for reaching the most difficult-to-reach areas,
ideal for cleaning radiators, door and window frames,
bathrooms and shutters.
To connect the steam lance to the steam concentrator, simply
screw it on. The same operation can be carried out for the
brush, which can in turn be screwed onto the steam
concentrator and onto the steam lance.
The different coloured brushes allow for a different colour for
each surface or environment.
9.3 Adjust the intensity of the steam by turning the adjustment
knob (5); for this type of surface we recommend Maximum level
of steam.
9.4 Ensure that the steam lock on the handle is deactivated (6).
9.5 Press and hold the steam trigger on the steam hose (6) to
start cleaning.
10. OTHER GENERAL USES
WARNING: Before cleaning the surface, always do a test on a
hidden area and see how it reacts to the application of steam.
10.1 BRIGHTENING UP CURTAINS AND DRAPES
BRIGHTENING UP CURTAINS AND DRAPES
Mites and dust can be removed from curtains and drapes by
steaming the fabric directly from the handle. The steam is able
to remove odours and brighten up colours, allowing the fabric
to be washed less frequently.
For this surface, set the steam to the minimum level .
10.2 REMOVING STAINS FROM CARPETS AND UPHOLSTERY
WARNING: Steam.
Risk of scalding!
Connect the concentrator accessory without the bristly round brush;
direct the steam directly onto the stain with the greatest angle
possible (never vertically to the surface to be cleaned) and place a
cloth beyond the stain to collect the dirt that has been "blown" away
by the steam pressure.
For this surface, set the steam to the minimum level .
10.3 TAKING CARE OF PLANTS AND HUMIDIFYING ROOMS
To care for your house plants, remove the dust from the leaves
by steaming them directly from the handle. Adjust the steam
to the minimum level and vacuum at a distance of 50 cm. Plants
breathe better and will be cleaner and brighter. Furthermore,
you can also use the steam to refresh spaces, especially those
frequented by smokers.
11. OUT OF WATER
The lack of water in the boiler is identified by the out-of-water
light coming on ( ) (17).
To resume use, simply:
- switch off and disconnect the Vaporetto.
- fill the tank as described in Section 1.
- connect and turn the Vaporetto back on.
WARNING: This operation must always be done after
disconnecting the appliance from the mains.
| 25 |