Cleaning Upholstery - POLTI Vaporetto SMART MOP Manuel D'instructions

5. CLEANING CARPETS AND RUGS
WARNING: Before cleaning fabrics with steam,
consult the manufacturer's instructions and
always carry out a test on a hidden section or
on a sample of the material. Allow the steamed
section to dry to make sure that no changes in
colour or deformations have occurred.
5.1 Make sure that Chapter 1 has been followed
and connect the accessories as indicated in
Chapter 2.
5.2 Connect the extension tubes to the steam
hose and the floor brush to the extension tubes.
Insert the brush with the
cloth attached (see point
4.3) in the special frame for
sliding on rugs.
5.3 Adjust the intensity of the steam by tur-
ning the adjustment knob; for this type of sur-
face we recommend Medium level of steam.
5.4 Deactivate the steam lock and continue
with steam delivery, pressing the steam trigger
on the handle of the steam hose.
5.5 Pass the floor brush over the surface.
Before removing the cloth from the brush,
wait a few minutes to allow the cloth to cool.
After which, remove the frame by resting the
foot on the relative symbol and then remove
the cloth by holding it firm with the foot re-
sting on the tab and pulling the brush up.
6. CLEANING GLASS, WINDOWS
AND TILES
WARNING: To clean glass surfaces during
cold weather, preheat the windows starting
to vacuum from a distance of about 50 cm
from the surface.
6.1 Make sure that Chapter 1 has been fol-
lowed and connect the accessories as indica-
ted in Chapter 2.
6.2 Adjust the intensity of the steam with the
special handle; for this type of surface we re-
commend Medium level of steam.
6.3 Ensure that the steam lock on the handle
is deactivated .
6.4 To clean windows and mirrors, steam the
surface thoroughly to dissolve the dirt. Con-
nect the small brush with window cleaner to
the flexible hose and go back over the surface
to remove the dirt, without dispensing steam.
The extension hoses can be connected to the
flexible hose to reach high surfaces.
6.5 To clean tiles, attach the cap to the small
brush and pass over the surface, dispensing
steam, in order to eliminate the dirt. The ex-
tension hoses can be connected to the handle
to reach high surfaces.

7. CLEANING UPHOLSTERY

(mattresses, sofas, car interiors, etc.)
WARNING: Before cleaning leather or fa-
brics with steam, consult the manufacturer's
instructions and always carry out a test on a
hidden section or on a sample of the mate-
rial. Allow the steamed section to dry to
make sure that no changes in colour or
deformations have occurred.
7.1 Make sure that Chapter 1 has been followed
and connect the accessories as indicated in
Chapter 2.
7.2 Connect the small brush to the steam hose.
7.3 Put on the sockette to the small brush.
7.4 Adjust the intensity of the steam by tur-
ning the adjustment knob; for this type of sur-
face we recommend Minimum level of steam.
7.5 Ensure that the steam lock on the handle
is deactivated.
7.6 Hold the steam trigger down on the hand-
le and pass over the surface.
8. CLEANING BATHROOM FIXTU-
RES, GROUTING
WORKTOPS
8.1 Make sure that Chapter 1 has been followed
and connect the accessories as indicated in
Chapter 2.
8.2 Adjust the intensity of the steam by turning
the adjustment knob; for this type of surface we
recommend Maximum level of steam.
8.3 Ensure that the steam lock on the handle
is deactivated.
8.4 Press and hold the steam trigger on the
handle and steam the surface abundantly to
dissolve the dirt. Use a dry cloth to remove the
dirt dissolved by the steam. It is possible to
connect one of the following accessories, re-
commended for removing encrusted dirt from
very narrow surfaces, to the flexible handle:
steam concentrator, small round brushes or lar-
ge round brush.
| 12 |
AND KITCHEN