Cleaning Floors - POLTI Vaporetto PRO 95 TURBO FLEXI Manuel D'instructions

• Maximum level : to remove encrustation, stains, grease and
to sanitise;
• Medium level : for carpets, rugs, glass and floors;
• Minimum level : to steam plants, clean delicate fabrics, wall
coverings, sofas, etc.

4. CLEANING FLOORS

Before using the appliance on delicate surfaces, ensure that
the part in contact with the surface is free from foreign bodies
that could cause scratches.
4.1 Make sure that section 1 has been followed and connect the
accessories as indicated in section 2.
4.2 Connect the extension tubes to the steam hose and the floor
brush to the extension tubes.
4.3 Release the floor brush by placing a foot on the
pulling up.
4.4 Attach the cloth included to the Vaporflexi floor brush by
inserting one end of the floor brush into the pocket of the cloth
(9), then insert the second end of the brush into the second
pocket of the cloth (10).
4.5 With the extension tubes push the floor brush downward
in order to lock it (11), possibly using a foot.
4.6 Adjust the intensity of the steam by turning the adjustment
knob; for this type of surface we recommend Medium level steam
(5).
4.7 Deactivate the steam lock (6) and continue with steam
delivery, pressing the steam trigger on the handle of the steam
hose (6).
4.8 Clean the floors by moving the brush.
The brush includes a small brush which is ideal for removing
the most stubborn stains. To use, turn the small brush (12), then
tilt the extension tubes so that the bristles touch the floor and
loosen the dirt (13-14).
At the end of the cleaning operations, the cloth can be removed
by pressing with a foot on the special symbol and pulling the
extension tubes upwards to release and open the brush.
Before removing the cloth from the brush, wait a few minutes
to allow the cloth to cool.
WARNING: Do not use the appliance without the cloth.
WARNING: For additional safety, test steam delivery on a
hidden area leave the steamed area to dry to ensure that no
changes in colour or deformations have occurred.
5. CLEANING RUGS AND CARPETS
WARNING: Before cleaning fabrics with steam, consult the
manufacturer's instructions and always carry out a test on a
hidden area or on a sample of the material. Allow the steamed
area to dry to make sure that no changes in colour or
deformations have occurred.
5.1 Make sure that section 1 has been followed and connect the
accessories as indicated in section 2.
5.2 Connect the extension tubes to the steam hose and the floor
brush to the extension tubes.
5.3 Place the cloth in the frame (15). Then insert the Vaporflexi
floor brush in the cloth placed in the frame, continuing as
described in Point 4.4.
5.4 With the extension tubes push the floor brush downward
in order to lock it (11), possibly using a foot.
5.5 Adjust the intensity of the steam by turning the adjustment
knob (5); for this type of surface we recommend Medium level of
steam.
5.6 Deactivate the steam lock (6) and continue with steam
delivery, pressing the steam trigger on the handle of the steam
hose (6).
5.7 Run the brush over the surface moving it backward and
(8) and
forward (16). At the end of the cleaning operations, the cloth
and the frame can be removed by pressing with a foot on the
special symbol
to release and open the brush.
Before removing the cloth from the brush, wait a few minutes
to allow the cloth to cool.
6. CLEANING GLASS, WINDOWS AND TILES
WARNING: To clean glass surfaces during cold weather,
preheat the windows starting to vacuum from a distance of
about 50 cm from the surface.
6.1 Make sure that section 1 has been followed and connect the
accessories as indicated in section 2.
6.2 Adjust the intensity of the steam by turning the adjustment
knob (5); for this type of surface we recommend Medium level of
steam.
6.3 Ensure that the steam lock on the handle is deactivated (6).
6.4 Press and hold the steam trigger on the handle of the steam
hose (6) and steam the surface thoroughly to dissolve the dirt.
6.5 For the Pro 95_Turbo Flexi model go back over the surface
with the window cleaner to remove the dirt, without steaming.
For a more abrasive action and more effective dirt removal, the
bristles supplied with the window-cleaning accessory can be
used
For the Pro 85_Flexi model use the manual window-cleaning
accessory to remove the dirt dissolved by the steam.
6.6 We recommend keeping a microfibre cloth close at hand
(Vaporetto Microfibre Cloths for manual use PAEU0231) to
complete the cleaning operations and dry the dirt dissolved by
steam.
| 24 |
(8) and pulling the extension tubes upwards