Fcc Part 15 - Radio Frequency Devices; Interference-Causing Equipment Standard (Ices-003 Issue 5); (For Canada Users); Interférence Électromagnétique - Konica Minolta bizhub 4752 Guide Rapide

1.3 Déclarations réglementaires

FCC Part 15 - Radio Frequency Devices

For United States Users
FCC: Declaration of Conformity
Product Type
Product Name
Options
This device complies with Part 15 of the FCC Rules
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful inter-
ference in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
-
Reorient or relocate the receiving antenna.
-
Increase the separation between the equipment and receiver.
-
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-
Consult the dealer or an experienced radio/TV technician for help.
7WARNING
-
The design and production of this unit conform to FCC regulations, and any changes or modifications
must be registered with the FCC and are subject to FCC control. Any changes made by the purchaser
or user without first contacting the manufacturer will be subject to penalty under FCC regulations.
-
This device must be used with a shielded interface cable. The use of non-shielded cables is likely to
result in interference with radio communications and is prohibited under FCC rules.

INTERFERENCE-CAUSING EQUIPMENT STANDARD (ICES-003 ISSUE 5)

(for Canada users)

This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
This device must be used with a shielded interface cable.
The use of non-shielded cables is likely to result in interference with radio communications and is prohibited
under ICES-003.
Interférence électromagnétique
Ce produit doit être utilisé avec un câble d'interface blindé.
L'utilisation de câbles non blindés est susceptible de causer des interférences avec les radiocommunications
et elle est interdite en vertu des réglementations CISPR 22 et des réglementations nationales.
bizhub 4752/4052
Multifunction Printer
bizhub 4752, bizhub 4052
(1) FS-P02, PF-P15, PF-P16, EK-P05, EK-P06, EK-P07, KP-101, AU-102,
AU-201S, FK-517, LK-102 v3, LK-104 v3, LK-106, LK-107, LK-108, LK-111,
LK-114, LK-115 v2, SK-501, DK-P02, UK-219---- (for bizhub 4752)
(2) FS-P02, PF-P15, PF-P16, EK-P05, EK-P06, EK-P07, KP-101, AU-102,
AU-201S, FK-517, LK-102 v3, LK-104 v3, LK-106, LK-107, LK-108, LK-111,
LK-114, LK-115 v2, SK-501, DK-P02, UK-219---- (for bizhub 4052)
1
1-13